BRUNOX EPOXY RUST
Descriere scurta
Descriere BRUNOX EPOXY RUST
150 ml
Unless you find the rust bucket look particularly attractive for a motorcycle, you should use BRUNOX Epoxy Rust Converter to put a stop to corrosion.
BRUNOX Epoxy is the only patented rust converter and priming system all in one, containing epoxy resins. The amber-coloured clear solution produces an organic metal complex on iron/steel, which prevents rust formation and, at the same time, acts as a perfect priming coat.
The key advantages:
- Good compatibility with most standard vehicle paints
- Penetrates approx. 7-10 times deeper into the rust pores than rust converter emulsions
- Unlimited shelf life in the well sealed container
- Free of heavy metals and mineral acids
Application in three steps:
1. Sand/brush off loose rust and wipe down
2. Spray from the can 3 to 4 times, and allow to dry
3. Apply top coat
Capacity: 150 ml
Please note:
- Always take the usual precautions for handling chemicals
- Avoid contact with the eyes and skin
- Do not inhale gases/vapours/aerosols
Facemask:
- Wear a facemask if ventilation is inadequate
- For short periods or low level exposure, use a filter mask; for longer periods or higher level of exposure, use a self-contained breathing apparatus
- Short-term filter mask: Filter A/P2, Filter AX
- Hand protection: Glove material: nitrile rubber, butyl rubber
- Eye protection: tightly sealing protective goggles
Extremely flammable aerosol., Pressurised container: may burst if heated., Causes serious eye irritation., May cause drowsiness or dizziness.