PRESTO EPOXY PRIMER

Simply painting over a motorcycle part just isn't possible. That won't go at all well. The part or specific area must be properly pretreated, derusted, smoothed, ground and cleaned. And then you need a professional primer: presto Epoxy primer, for example, like the 400 ml aerosol can shown here. You can prime an area of roughly 1 m² with this, which makes it eminently suitable for painting parts and for "spot repairs".

• Outstanding adhesion and corrosion protection characteristics on e.g. bare steel, galvanised sheet-steel, stainless steel, aluminium, anodised aluminium, sanded old paint coats, polyester fillers, various plastics and GRP
• Straightforward time-saving processing
• Fast drying
• Good flow behaviour
• Can be painted over with solvent and water-based topcoats
• Provides effective insulation against moisture
• Wet-on-wet processing possible
• Temperature-resistant to 90°C
• Capacity: up to approx. 1 m²

Contains: 400 ml

Very important:
Carefully read the instructions for use prior to application and observe the safety instructions.

Danger. Extremely flammable aerosol. Pressurised container: may burst if heated. Causes skin irritation. Causes serious eye damage. May cause drowsiness or dizziness. Harmful to aquatic life with long lasting effects. Contains epoxy resin. May produce an allergic reaction.