HIGHSIDER AKRON-FLASH LED

Hard to believe, but the very inconspicuous Highsider *Akron-Flash LED* handlebar end turn signals are available as a 2in1 version with position light function. CNC-machined, bead-blasted aluminium, an anodised cap in black or titanium and tinted glass also play a major role in this version. Otherwise, with the E-approved Highsider *Akron-Flash LED 2in1* handlebar end turn signal/position light, you can, as always, assume the best manufacturing quality and function, as is usual with Highsider. A front direction indicator that absolutely pleases and stands out in both turn signal and position light use.

• beautifully shaped handlebar end with indicator function and position light
• ultra-bright LED
• flashing angle-adjustable flashing signal lights of the latest generation
• with tinted glass
• high-quality CNC-milled aluminium housing with characteristic cap
• hardly noticeable when not in use
• clamping system with different sleeves easy to mount
• universal fit for 7/8", 1" inch or X-Bar tubular handlebars with an inner diameter of 12 to 22 mm
• cables are routed in the handlebars and are approx. 100 cm in length

dimensions:

• Width: 36 mm
• Diameter: 34.5 mm
• Cable length: approx. 1000 mm
• Angle of light modules: continuously adjustable by 26° degrees

Connections:

• Power consumption: 13.5V, 0.27A, 3.65W and 13.5V, 0.11A 1.49W
• Yellow cable = indicator (+)
• White cable = position light (+)
• Black cable = ground (-)

Accessories TIP:
The optionally available Highsider *PL Control-Box CB2* (10036783) switches off the position light during the flashing process. After the flashing process, it is reactivated with a small delay.

Scope of delivery:
1 pair of Highsider *Akron-Flash LED 2in1* handlebar end turn signals/position light.
2 x clamping sleeves Ø 13 mm, Ø 16 mm
3 x centring ring
2 x central screw M6 with fixing ring
2 x cone nut M6

Note:
Resistors or a flasher relay may be necessary for correct flashing.