JOOST MULTI FLASHER RELAY

It's really quite fascinating what can be done with modern electronics. A component scarcely bigger than an eraser can house the entire turn signal control system, in combination with handlebar buttons and switches. That's exactly what the *Multi Flasher* relay from Joost achieves. This multi turn signal relay is so compact, it will fit virtually any handlebar. All you need is the appropriate push buttons to go with it.

Specifications:

• Dimensions: 38 mm x 16 mm x 11 mm
• Weight: approx 25 grams
• Power consumption: Up to 7 mA micro-controller, 2 x 5 A power module
• Housing: ABS housing encapsulated with Odopal cast resin
• Input voltage: 7-18 V
• Connections: Control unit 0.5mm², power module 1 mm²
• Cable length: 22 cm each
• Maximum ambient temperature: 80 °C
• Permitted current with 12 V connection: 2 X 5 A
• Short-circuit-proof, limited at 15 A

The following functions, in combination with push buttons, are possible:

COMFORT MODE: In this mode, the turn signal cancels itself automatically after a set number of flashes, depending on how long the button is pressed: after 4 flashes (brief tap = overtaking), 30 flashes (longer press = turning) unless you press the button again. If you press the button for longer than 1 second, the turn signal stays on. This autostop function can be activated or deactivated via a cable.

SHOW MODE: Both turn signals flash twice as soon as the ignition is switched on. This function is activated via an earth bridge.

HAZARD WARNING MODE: This mode is activated by pressing the left and right buttons simultaneously. The flashing speed is, of course, independent of the connected load. The unit can also be used in place of a flasher unit.