3-IN-1 COMBI HOLDER

3-in-1 holder for motorway riding (Austria) and for parking (Germany)

Holder for vignette (approved by the Austrian motorway authority ASFINAG V4), parking disk or pay-and-display parking ticket

This innovative holder for the vignette (toll sticker) required on Austrian motorways will not damage your paintwork or bike. Much easier than having to attach and remove the sticker from your bike, and no risk of scratched paintwork. Once it is fixed in place, the mount cannot be transferred to another vehicle, so it complies with Austrian regulations.
Dimensions: 6.9 x 6.7 cm

Once fitted to your motorbike, the vignette holder also enables you to attach the parking disc/ticket holder supplied in the set for use in designated parking areas in Germany.
Dimensions: 11.0 x 15.0 cm

Installation instructions

• Austrian motorway vignette:

Feed the holder strap around the fork/steering stem (front fork only) and pull tight. Use a screwdriver or similar tool to ensure that the strap is fully tightened and locked in place, rather like a cable tie. Cut off the projecting strap as close to the fork as possible,
e.g. using side-cutters. Then stick the vignette to the mounting plate, which must be free of dust. Make sure that the vignette is well centred and the expiry date is clearly visible.

• For use as a parking disc/ticket mount (D):

Set the time on the parking disc using the arrow (24-hour scale), and secure the disc in the double snap catch via the slide system on the rear.
If you wish to use the mount purely for pay-and-display parking tickets, the parking disc can be removed again by lifting up the two clips and pulling it off from the bottom upwards. Then place your ticket under the window supplied with the mount; fit the window over the bottom edge of the holder and snap it over the top edge.

The parking disc itself is only suitable for use when the vehicle is stationary. Do not use it while riding.